About Us
Contact Info
-
-
Phone
+91 9816632049 -
Epoxy Modified Universal Bonding Primer
Advanced single-component epoxy modified primer designed for superior adhesion, surface strengthening, sealing, and long-lasting coating performance across multiple construction and industrial applications.
MYCROFLOOR PRIME is a high-performance epoxy floor primer specially developed for
epoxy flooring systems, PU flooring systems, industrial floor coatings, and heavy-duty
concrete protection applications.
Its low-viscosity penetrating formulation deeply seals porous concrete surfaces, improves
substrate strength, and creates a strong bonding layer for subsequent floor coating systems.
The primer enhances adhesion, minimizes air bubble formation, and improves the durability
and service life of industrial flooring systems. Similar epoxy floor primers are valued for deep
penetration, strong adhesion, moisture resistance, and concrete sealing performance.
Proper floor preparation and primer application are widely considered critical for long-term epoxy flooring adhesion and performance.
Surface Preparation
The surface must be clean, dry, and free from dust, oil, grease, laitance, curing compounds,
and loose particles.
Mix Part A and Part B thoroughly using a slow-speed mechanical mixer until uniform consistency is achieved.
Apply evenly using roller, brush, or squeegee.
Apply subsequent epoxy or PU floor systems within the recommended overcoating interval.
Available in:
➢ 5 Kg Kit
➢ 10 Kg Kit
➢ 20 Kg Kit
➢ 30 Kg Kit
➢ Store in cool and dry conditions
➢ Protect from direct sunlight and moisture
➢ Shelf Life: 12 Months in unopened condition
➢ Use protective gloves and safety equipment during application.
➢Avoid skin and eye contact.
➢Ensure adequate ventilation during use
Epoxy Protective Top Coat
High-performance two-component epoxy top coat designed for superior surface protection,
chemical resistance, abrasion durability, and long-lasting decorative industrial finishes.
MYCROLEVEL EP is a premium solvent-free self-leveling epoxy flooring system specially developed for industrial, commercial, pharmaceutical, and decorative flooring applications requiring superior flatness, durability, and seamless aesthetics.
Its advanced self-smoothing epoxy technology creates a dense, joint-free, high-build floor surface with excellent mechanical strength, abrasion resistance, and long-term chemical protection.
The system is ideal for medium to heavy-duty traffic areas where hygienic, dust-free, and easy-to-clean flooring is required.
The substrate must be clean, dry, mechanically prepared, and free from dust, oil, grease, laitance, and loose particles.
Apply suitable epoxy primer before application.
Mix Part A and Part B thoroughly using a slow-speed mechanical mixer until uniform consistency is achieved.
Pour the mixed material and spread using a notched trowel followed by a spike roller for air release and smooth leveling.
Allow adequate curing before foot traffic or heavy loading.
High Build Epoxy Coating
Heavy-duty two-component high build epoxy coating designed for superior surface
protection, chemical resistance, abrasion durability, and long-lasting industrial performance.
MYCROBUILD EP is a premium-grade high build epoxy coating specially developed for industrial flooring, concrete protection, steel structures, warehouses, manufacturing plants, and heavy-duty coating applications requiring thick film protection and exceptional durability.
Its advanced high-solids epoxy technology provides a seamless, dense, and mechanically strong protective layer with excellent resistance against chemicals, abrasion, impact, water, oils, and industrial wear.
High-build epoxy systems are commonly used for industrial floors because they provide thick protective films with strong abrasion and chemical resistance.
Ensure the substrate is clean, dry, mechanically prepared, and free from dust, oil, grease, laitance, and loose particles.
Apply suitable epoxy primer before coating application.
Mix Part A and Part B thoroughly using a slow-speed mechanical mixer until uniform consistency is achieved.
Apply evenly using roller, notched trowel, or airless spray equipment depending on required thickness.
Allow adequate curing before traffic exposure or chemical service.
Anti-Corrosion Epoxy Coating
Advanced two-component anti-corrosion epoxy coating designed for superior metal
protection, chemical resistance, moisture barrier performance, and long-term industrial
durability.
MYCROGUARD EP is a high-performance anti-corrosion epoxy coating specially formulated to protect steel, metal structures, pipelines, machinery, tanks, marine structures, and industrial assets from corrosion, chemical attack, moisture penetration, and harsh environmental exposure.
Its advanced epoxy resin technology creates a dense, impermeable, and highly durable protective barrier with excellent adhesion and long-lasting resistance against rust formation, industrial chemicals, salts, oils, and abrasion.
Epoxy anti-corrosion coatings are widely used for industrial steel and infrastructure protection because of their strong adhesion, low permeability, and excellent chemical resistance.
Remove rust, oil, grease, dust, old loose coatings, and contaminants by mechanical cleaning or abrasive blasting.
Apply suitable anti-corrosion epoxy primer where required.
Mix Part A and Part B thoroughly using a slow-speed mechanical mixer until homogeneous consistency is achieved.
Apply evenly using brush, roller, or airless spray equipment.
Allow proper curing before exposure to chemicals, moisture, or heavy service conditions.
Zinc Rich Epoxy Primer
High-performance two-component zinc rich epoxy primer designed for superior anti
corrosion protection, cathodic resistance, and long-term steel durability in aggressive
industrial and marine environments.
MYCROZINC EP is a premium-grade zinc rich epoxy primer specially formulated to provide exceptional corrosion protection for steel structures, pipelines, tanks, bridges, machinery, marine equipment, and industrial infrastructure.
Its advanced zinc-loaded epoxy technology creates both a physical barrier and cathodic sacrificial protection mechanism, helping prevent rust formation even in highly corrosive environments.
Zinc-rich epoxy primers are widely used in industrial and offshore applications because they combine barrier protection with galvanic corrosion resistance for steel substrates.
Prepare steel surface by abrasive blasting or mechanical cleaning to remove rust, mill scale, oil, grease, and contaminants.
Mix Part A and Part B thoroughly using a slow-speed mechanical mixer until uniform consistency is achieved.
Apply evenly using airless spray, brush, or roller depending on project requirements.
Apply suitable epoxy intermediate or PU topcoat within recommended recoat interval.
Epoxy Injection Grout
High-performance two-component low viscosity epoxy injection grout designed for
structural crack repair, concrete strengthening, void filling, and long-lasting structural
rehabilitation.
MYCROINJECT EP is a premium-grade epoxy injection grout specially developed for repairing cracks, honeycombs, voids, and damaged concrete structures through pressure injection techniques.
Its ultra-low viscosity epoxy system deeply penetrates fine cracks and internal cavities, restoring structural integrity, bonding cracked concrete sections, and enhancing long-term durability.
The solvent-free non-shrink formulation provides exceptional adhesion, high mechanical strength, moisture resistance, and chemical resistance for critical repair applications.
Clean cracks and remove dust, loose particles, oil, grease, and contaminants from the repair area.
Install injection nipples/ports along the crack line and seal the surface externally.
Mix Part A and Part B thoroughly using slow-speed mechanical mixer until uniform consistency is achieved.
Inject material using low-pressure or high-pressure injection pump until complete crack filling is achieved.
Allow proper curing before removing injection ports and finishing the surface.
Crack Repair Epoxy
High-performance two-component crack repair epoxy designed for structural crack sealing,
concrete restoration, surface bonding, and long-lasting repair durability.
MYCROFIX EP is a premium-grade epoxy crack repair system specially formulated for repairing structural and non-structural cracks in concrete, masonry, industrial floors, beams, columns, slabs, and damaged construction surfaces.
Its advanced low-viscosity epoxy technology deeply penetrates cracks, creates strong structural bonding, restores monolithic integrity, and prevents further crack propagation.
The solvent-free high-strength formulation provides excellent adhesion, superior mechanical performance, chemical resistance, and long-term durability for repair and rehabilitation applications.
Clean cracks and remove dust, loose particles, oil, grease, laitance, and contaminants from the repair area.
Mix Part A and Part B thoroughly using slow-speed mechanical mixer until uniform consistency is achieved.
Apply by putty knife, gravity feed, or pressure injection depending on crack width and repair requirement.
Remove excess material and allow proper curing before loading or coating application.